Heljan'O' Gauge 7mm HJ2013 CLASS 20 Blue DCC Fitted

Heljan'O' Gauge 7mm HJ2013 CLASS 20 Blue DCC Fitted

Heljan'O' Gauge 7mm HJ2013 CLASS 20 Blue DCC Fitted

Heljan'O' Gauge 7mm HJ2013 CLASS 20 Blue DCC Fitted

Heljan'O' Gauge 7mm HJ2013 CLASS 20 Blue DCC Fitted

Heljan'O' Gauge 7mm HJ2013 CLASS 20 Blue DCC Fitted

Heljan'O' Gauge 7mm HJ2013 CLASS 20 Blue DCC Fitted

Heljan'O' Gauge 7mm HJ2013 CLASS 20 Blue DCC Fitted

Heljan'O' Gauge 7mm HJ2013 CLASS 20 Blue DCC Fitted

Heljan'O' Gauge 7mm HJ2013 CLASS 20 Blue DCC Fitted   Heljan'O' Gauge 7mm HJ2013 CLASS 20 Blue DCC Fitted

Heljan'O' Gauge 7mm HJ2013 CLASS 20 Blue DCC Fitted. This model is provided with no running numbers and is one of my last two O. Decoder is DCC Concepts Zen Buddha see here. Item was DCC Sound fitted but I have had the decoder replaced for a Class 66 in OO. Zimo dumbo speaker still installed in the tanks. Priced to sell taking into account defects as noted below. Item is fitted with a DCC Concepts Zen Buddha decoder (address 03) with stay alive kapton tape and plastic sheet installed to protect decoder from touching the chassis. Programmed and wired so red lights are independent - not directional. Very good runner, in overall very good condition other than mentioned above - all broken parts are provided as brand new on sprue replacements from Howes.

See video of it running and all functions working here. All detailing parts present as fitted by the factory - snowploughs are bagged and unused. The original instructions are missing but the decoder manual is included. Several alterations to the internal wiring has been made.

And lift the chassis very gently. The chassis is a very tight fit at the cab end. Unplug the two lighting wires and then gently slide the chassis towards the cab and lifting out as you go. I have hard wired the nose end white lights as the Heljan plugs are pretty much useless and the pins slide out all the time - the other 4 plugs are intact. At the nose end one blue wire has been joined onto the other at the circuit board - this was to reduce the numbers of wires going into the decoder.

The cab can be removed by very gently prising it upwards and rearwards to break the glue seal - its only a very small dab of poly. This way you can access the cab without removing the body to place a driver etc.

The item "Heljan'O' Gauge 7mm HJ2013 CLASS 20 Blue DCC Fitted" is in sale since Saturday, March 16, 2019. This item is in the category "Collectables\Model Railways & Trains\O Gauge\Locomotives". The seller is "stevenlewis2010" and is located in Scarborough.

This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Canada, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Egypt, Guernsey, Gibraltar, Guadeloupe, French guiana, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Martinique, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Saudi arabia, United arab emirates, Ukraine, Chile.

  • Power Supply: DC
  • Colour: Blue
  • Year: 2013
  • Features: Working Fan
  • Gauge: Standard
  • Brand: Heljan
  • Control: Digital


Heljan'O' Gauge 7mm HJ2013 CLASS 20 Blue DCC Fitted   Heljan'O' Gauge 7mm HJ2013 CLASS 20 Blue DCC Fitted